 |
|
|
|
 0-0
    |
Main features ● It is suitable for large-scale and continuous production, with large flow rate and high energy conversion rate, and the particle size distribution range is narrow when nano-scale grinding is achieved. ● The separation system with large flow area ensures that the material stays in the cylinder for a short time, forming a continuous cycle, ensuring efficient production and no blockage. ● The high wear-resistant grinding inner cylinder and grinding rotor can be easily replaced, and different materials can be selected for different materials to reduce the use cost. ● The barrel jacket and the double cooling system at the discharge end are used to ensure that the material is effectively ground at a certain temperature. ● With real-time monitoring and protection systems such as water temperature, material temperature, material pressure, water pressure, air pressure, etc., to ensure the normal operation of the equipment. ● Optional full explosion-proof button control or intelligent PLC touch screen control. 7. The unique slide rail de-tank design is used, which is very convenient to open and clean or replace the barrel.
|
Types & options
Model | ISD-5 | ISD-20 | ISD-30 | ISD-60 | ISD-100 | ISD-150 | ISD-300 |
Effective Volume L | 5 | 20 | 30 | 60 | 100 | 150 | 300 |
Main motor power Kw | 5.5 | 22 | 30 | 37 | 55 | 75 | 90 |
Main shaft speed Rpm | 0-2800 | 0-1100 | 0-950 | 0-750 | 0-650 | 0-650 | 0-650 |
Cooling water L/h | 0.6 | 1 | 1.5 | 2 | 2 | 2 | 4 |
Output L/h | 10-100 | 30-300 | 50-500 | 70-700 | 120-1200 | 1500-2000 | 3000-5000 |
Product Introduction ● Large-flow sand mill, high-efficiency grinding disc, super-large centrifugal wheel and screen make the grinding beads better distributed in the grinding chamber. Under the condition of high linear speed, the centrifugal principle is used to make larger particles of materials grind. Repeat grinding in the cavity; ● The separation system with large flow area ensures that the material stays in the cylinder for a short time, forming a continuous cycle state, which can well discharge qualified particles, and at the same time, the material in the cylinder quickly enters the next cycle of grinding to maintain consistent dispersion. to obtain the best grinding and uniform particle size distribution. |
 |
 |
Working Head StructureType of Horizontal Bead Mill Working principle: The solid-liquid mixture material that has been pre-dispersed and wetted by the mixer is fed into the cylinder by the feeding pump. The material enters the grinding chamber from the top with the feeding pump, and is evenly distributed with the rotation of the rotor, eddy current in the gap between the rotor and the stator Under the action of centrifugal force, the material is thoroughly pre-dispersed. In the next intense grinding, the rotor and stator continuously have violent impact changes to the grinding medium, the grinding medium acts on the material again, the material is ground, and the ground material stays in the grinding chamber for a specific grinding time, thereby obtaining a very narrow Under the action of the feed pump pressure and centrifugal force, the grinding medium returns to the grinding chamber due to the difference in density, but the material is filtered and separated by the screen separator along the opposite direction of the centrifugal force, and the cycle reciprocates. |
 |
Laboratory trials In order to be able to demonstrate the advantages and effectiveness of our IDA- DISSOLVER®s and IDA-HORIZONTAL-BEAD-MILL®s with your products our comprehensively equipped modern laboratory is available for you. |
 |
Sales@Idamill.com 
+86-13585068675
+86-510-86566789
Sales@Idamill.com
+86-13585068675
